Engine Upload

Made a B18C Type R from a mid 90's integra Type R.

Look at the OP, everyone

I uploaded the xml file, I dont know why it isn't showing up.

I'm topping out at 623 HP and i cant go any higher how are you guys getting 629 HP and 630 HP?

Challenge for you guys.



Actually, 2 separate challenges in one.
1. Increase power and torque output
OR
2. Make it more economical without dropping below 400BHP

Stipulations:
No race intake or exhaust headers.
Keep the fuel feed type as is (Direct Injection)
You need to keep the cat and mufflers untouched. Exhaust diameter is free game.
Maximum RON is 95.


Here's the XML if you'd like to take a crack at either challenge. http://www.sendspace.com/file/lqit2k

Nothing super fancy here, just a modern direct injected econobox motor along the lines of Mazda's Skyactiv engines. Emphasis placed on drivability and economy with a slightly sporty character.

http://www.mediafire.com/?lk5bad59wluhv6t

Here's my 2020 Racing Engine.
http://www.sendspace.com/file/ps53lq

Also, I have made the Rover A-Series engine found in the Mini Cooper from 1998 to 2001.
http://www.sendspace.com/file/4nfhhs

Finally, I decided to make the tiny high revving motorbike engine found in the 1963 Honda S500.
http://www.sendspace.com/file/0a1v1p

Austin A30
This is rather enjoyable



http://cl.ly/3P2P3g3X292i280e2T38/Austin%20A30Rev0.xml

Love it

Made a B18C Type R from a mid 90's integra Type R.

I did exactly the same thing though did you find you had to raise the compression slightly over the real life motor to make the power?

Converted that 3.1L of mine to use DI, and here it is. http://www.sendspace.com/file/kvbba9